ODROID N2L is a new generation single board computer that is more powerful, more stable, and faster performing than the highly versatile N2+ in a more compact, cost-effective way. Suitable for various standalone embedded system which don’t require Ethernet connectivity (Wi-Fi Adapter available separately)
The N2L integrates a quad-core ARM Cortex-A73 2.4Ghz CPU cluster and a dual core Cortex-A53 2.0Ghz cluster with a new generation Mali-G52 GPU. Thanks to the modern 12nm silicon technology, the A73 cores runs at 2.4Ghz without thermal throttling using the stock metal-housing heatsink allowing a robust and quiet computer.
Thanks to the updated LPDDR4 RAM, the N2L performance is around 15% faster than the N2+’s with even lower power consumption.
The size is decreased to just 69 x 56mm making easy to fix into smaller standalone devices.
| Amlogic S922X CPU | 1 x Micro SD Slot | ||
| LPDDR4 RAM | 1 x UART for System Console | ||
| DC Power Jack | 1 x Fan Connector | ||
| 1 x HDMI 2.0 | 40 x GPIO Pins | ||
| Up: 1 x USB 3.0, Down: 1 x USB2.0 | 1 x eMMC Module Socket | ||
SBC Specification
| Form Factor | Dimensions including Fan heatsink: 69mm x 56mm x 22mm Dimensions including Tall heatsink: 69mm x 56mm x 32mm Weight: 50g including Fan heatsink, 66g including Tall heatsink |
||
| Processor | Amlogic S922X Processor (12nm) Quad-core Cortex-A73(2.2Ghz) and Dual-core Cortex-A53(2Ghz) ARMv8-A architecture with Neon and Crypto extensions Mali-G52 GPU with 6 x Execution Engines (800Mhz) |
||
| Memory | LPDDR4 4GiB or 2GiB with 32-bit bus width Data rate: 3216 MT/s 1.1Volt low power design |
||
| Storage | 1 x eMMC connector (8G, 16G, 32G, 64G and 128G are available) 1 x microSD slot (DS/HS modes up to UHS-I SDR104) |
||
| Networking | Optional WiFi or Ethernet USB adapters | ||
| Video | 1 x HDMI 2.0 (up to 4K@60Hz with HDR, CEC, EDID) – Although the +5V Power pin is able to supply a minimum of 300mA, according to HDMI 2.0 specification, a sink shall not draw more than 50mA of current from the +5V Power pin. |
||
| Audio | 1 x HDMI digital output | ||
| External I/O | 1 x USB 3.0 Host port 1 x USB 2.0 Host port 1 x Debug serial console (UART) 1 x MIPI DSI 4Lane (TBD) 1 x Peripheral Expansion Header (40-pin, 2.54mm pitch) – 2 x DC 5V, 2 x DC 3.3V, 1 x DC 1.8V, 8 x GND – 1 x SPI – 1 x UART – 2 x I2C – 25 x GPIO (Max) – 2 x ADC input (10bit, 1.8V Max) – All of I/O signal level is 3.3 Volt except for ADC input at max 1.8 Volt |
||
| Other features | Built with a large passive heatsink System LEDS Indicators: – Red (PWR) – Solid light when DC power is connected – Blue (ALIVE) – Flashing like heartbeat while Kernel is running. Active Cooling Fan Connector (5V 2-pin) – Connector (2-pin, 1.25mm pitch) |
||
| Power | 1 x DC jack : outer (negative) diameter 5.5mm, inner(positive) diameter 2.1mm 7.5V ~ 16V (Recommend range of input) – DC 12V/2A power adapter is recommendedPower consumption: – IDLE : ≃ 1.5W (Performance governor), 1.3W(Conservative governor) – CPU Stress (Passive Heat-Sink) : ≃ 5.4W (@1908/2208MHz, Stock), 5.8W (@2016/2400MHz, Overclock) – CPU Stress (Active Cooling-FAN) : ≃ 6.1W (@1908/2208MHz, Stock), 6.4W (@2016/2400MHz, Overclock) – Power-Off : ≃ 0.2W |
||
