MiSTer FPGA Kit (Digital with DUAL Ram)
Kits is fully assembled and tested in the following configuration.
- Terasic DE10-Nano FPGA board with HDMI and Ethernet
- Options for 64GB, 256GB, 512GB, or 1TB SD card preloaded with OS and demo games ready to play
- DUAL SDRAM capable for total of 256MB ram. Comes with 128MB allowing but you can just add another 128MB ram module to your cart and we will install it for you!
- Digital IO board that adds 3.5mm Audio-in Jack, Secondary SD, and TOSLink, 3 Buttons, 3 Status LEDs
- USB Hub board that provides 6 additional USB ports, with expansion connector
- RTC V1.3 Real Time Clock Board (not installed but included)
- Upgraded 5V 6A power supply (US plug)
- On/Off switch on the unit
- Heat Sink for the CPU
- Low Noise RBG Cooling Fan
- All needed cables
- Exclusive Custom made case enclosure – Default is Black. Please add a note to your order if you want another color.
- Fully Assembled and Tested
DE10-Nano FPGA Board Included
The DE10-Nano board has many features that allow users to implement a wide range of designed circuits, from simple circuits to various multimedia projects. The following hardware is provided on the DE10–Nano board:
- Intel Cyclone® V SE 5CSEBA6U23I7 device (110K LEs)
- Serial configuration device – EPCS64 (revision B2 or later)
- USB-Blaster II onboard for programming; JTAG Mode
- HDMI TX, compatible with DVI 1.0 and HDCP v1.4
- 2 push-buttons
- 4 slide switches
- 8 green user LEDs
- Three 50MHz clock sources from the clock generator
- Two 40-pin expansion headers
- One Arduino expansion header (Uno R3 compatibility), can be connected with Arduino shields
- One 10-pin Analog input expansion header (shared with Arduino Analog input)
- A/D converter, 4-pin SPI interface with FPGA
HPS (Hard Processor System)
- 800MHz Dual-core ARM Cortex-A9 processor
- 1GB DDR3 SDRAM (32-bit data bus)
- 1 Gigabit Ethernet PHY with RJ45 connector
- USB OTG Port, USB Micro-AB connector
- Micro SD card socket
- Accelerometer (I2C interface + interrupt)
- UART to USB, USB Mini-B connector
- Warm reset button and cold reset button
- One user button and one user LED
- LTC 2×7 expansion header
